APPLICATION
Ideal for walls and floors at interior and exterior area
Ideal for use in dry/wet areas such as washing room, swimming pool etc.
Ideal for use with almost all kinds of tiles
SUBSTRATE PREPARATION
All surfaces including the back of tiles to be treated must be structurally sound, clean and free of dirt, grease or other surface contaminants. Holes/non-structural cracks should be filled. The substrate surface should also be strong enough.
MIXING
Pour water in the mixing container first, and then add the T2T Tile Adhesive while mixing for with heavy duty drill, then wait for a few minutes and then continuous mixing to give a lump free mortar.
Mixing Ratio? Powder: Water =20kg：4.5L
INSTALLATION
Apply the mortar to the substrate as ribbed and comb through with a notch trowel, and apply the mortar to the back side of the tiles, then press firmly into the freshly combed mortar bed.
Each application area should not be over 10m²?and finish tiling within 10 minutes.
Allow to cure for 24 hours before applying grout or other surface treatments
LIMITATIONS
The product is intended for use at material and surface temperature 5-35℃
Never mix with cement or additives other than ARDEX approved products
PACKAGE
20kg
STORAGE & SHELF LIFE
12 months(original sealed), in dry, clean, shady and cool place without ventilation.
TECHNICAL DATA
The data below is taken in laboratory at 23 and 50% humidity：